1CH TI TDA4V developer kit for Texas Instruments

  1.3MP OX01F10 with ISP  FPDLinkIII Camera      Overview SG1-OX01F10C-FPDLink-Hxxx camera module is equipped with OmniVision CMOS image sensor OX01F10 and TI FPDLink III. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure   is supplied with an M12 lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Adapter board/Image Solution Adaptation Developer kit /output interface Maximum number ofcameras connected Picture ‍SG2A-ORIN-FPDLink‍ Adapter plate NVIDIA Jetson AGX Orin/AGX Xavier Developer kit 8 SGDA-01413‍ Adapter board Texas Intrusments FPDLink III   Developer Kit 4 SerDes Camera to USB Converter SG8-U30-‍FPDLink NVIDIA Jetson Orin Nano/NX Developer Kit   ARM platform/computer/industrial computer/USB3.0 interface 1 Compatible with UVC protocol, providing upper computer acquisition software If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. Calibrate camera internal parameters 3. S-mount IP67 compliant lens focused and glued at our factory 4. Multi−Camera synchronization Support 5. Support different focal length lens 6. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

  SGDA-01413 TDA4V FPDLink III Adapter board Consistent with the official development version design, compatible with the official board Overview  SGDA-01413 Application Daughter Board , Allow up to four connections of 2 millionPixel camera, allowing up to four radar modules to be connected through coaxial cablesBlock. This design utilizes these coaxial cables to provide power and reverse direction for the sensor Channel communication and clock synchronization. These two 4Gbps FPDLink III quads Dao deserializer supports connecting mobile industry processors through Samtec connectors The dual output of the MIPI camera serial interface 2 (CSI-2) is connected to the Application processor. Adapter plate function Compatible with TI processor SDK for TDA4x processors Provide a wide voltage range for coaxial cable power supply Receive 8-channel high-speed data input through FPD-Link III synchronization function Provide a wide power supply voltage range (4V to 14V) for coaxial cable power supply Direct connection to EVM through CSI-2 interface The Automotive battery can directly provide power to the circuit board and has reverse current protection function Utilize MSP430 ™ MCU initialization and configuration video pipeline Designed to be compatible with onboard or external MCUs, with or without the use of MCUs Can be used with any camera that uses a compatible FPD-Link III DS90UB953 serialize Application Advanced Driving Assistance System (ADAS) Look around CMS and rearview mirror replacement ADAS Domain Controlle ※ SGDA-01413 TDA4V Application Daughter Board It is an application adapter board suitable for Texas Instruments TDA4V development board.  

- 2~16 Meters long   - Double-Female interface   - IP67 Water-proof

- 2~10 Meters long   - Male & Female interface   - IP67 Water-proof

  3MP ISX031 with ISP FPDLink III Camera Overview  SG3S-ISX031C-F3A-Hxxx camera module is equipped with SONY CMOS image sensor ISX031 and TI FPDLink III. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure – is supplied with an AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SerDes Camera to USB Converter SG8-U30-FPDLink NVIDIA Jetson Orin Nano/NX Developer Kit ARM platform/computer/industrial computer/USB3.0 interface 1     If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. External trigger support 4. Multi−Camera synchronization Support 5. Support different focal length lens 6. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots