2.95MP ISX031 with ISP GMSL2 Camera

  2.6MP AR0233 with ISP GMSL2 Camera      Overview SG2-AR0233C-5200-G2A-Hxxx camera module is equipped with ONSEMI CMOS image sensor AR0233 and Maxim GMSL2. It has an automotive grade sensor with a welltuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure is supplied with an M12 lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number ofcameras connected Picture SG8A-ORIN-GMSL2‍ Adapter board NVIDIA Jetson AGX Orin/AGX Xavier Developer kit 8 SerDes Camera to USB ConverterSG8-U30-GMSL2 NVIDIA Jetson Orin Nano/NXDeveloper KitARM platform/computer/industrialcomputer/USB3.0 interface 1 Compatible with UVC protocol, providing upper computer acquisition software CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

  5.4MP IMX490 with ISP GMSL2 Camera      Overview SG5-IMX490C-5300-GMSL2-Hxxx camera module is equipped with SONY Semiconductor CMOS image sensor IMX490 and Maxim GMSL2 . It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure – is supplied with an M12/M15/M16/AA lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number ofcameras connected Picture SG8A-ORIN-GMSL2‍ Adapter plate NVIDIA Jetson AGX Orin/AGX Xavier Developer kit 8 CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67/IP69K compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

  Jetson AGX Orin 8CH GMSL2 camera adapter board Overview  SG8A-ORIN-GMSL2 adapter board, which allows up to 8 cameras to be connected to the Jetson AGX Orin/Xavier module, is fully compatible with the NVIDIA Jetson AGX Orin/Xavier Development Kit. As there are many different types of GMSL cameras available, the adapter board can be adaptively operated at different frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through software configuration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and power are sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install in automotive applications. Adapter plate function Support for NVIDIA Jetson AGX Orin/Xavier Development Kit Compatible with different versions of NVIDIA JetPack SDK Supports up to 8 GMSL cameras Support for synchronous triggering Cameras can transmit up to 15 metres Instructions for using the adapter plate The driver package for the SG8A-ORIN-GMSL2 adapter board is developed on a specific Jetson Linux version and you need to make sure the Jetson Linux version matches before installing the driver. If it does not match, you need to re-flash the system, otherwise the system will not boot after installing the driver. NVIDIA Jetson AGX Orin/Xavier supports two types of flashes using SDK Manager and Flash.sh script. Preparation required NVIDIA Jetson AGX Orin/Xavier Development Kit Computer with Ubuntu 18.04/20.04 USB TYPE-C data cable 1pc  

  8CH GMSL2 Camera Developer Kit for NVIDIA Jetson AGX Orin Overview  SG8A-ORIN-GMSL2 adapter board, which allows up to 8 cameras to be connected to the Jetson AGX Orin/Xavier module, is fully compatible with the NVIDIA Jetson AGX Orin/Xavier Development Kit. As there are many different types of GMSL cameras available, the adapter board can be adaptively operated at different frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through software configuration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and power are sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install in automotive applications. Adapter plate function Support for NVIDIA Jetson AGX Orin/Xavier Development Kit Compatible with different versions of NVIDIA JetPack SDK Supports up to 8 GMSL cameras Support for synchronous triggering Cameras can transmit up to 15 metres Instructions for using the adapter plate The driver package for the SG8A-ORIN-GMSL2 adapter board is developed on a specific Jetson Linux version and you need to make sure the Jetson Linux version matches before installing the driver. If it does not match, you need to re-flash the system, otherwise the system will not boot after installing the driver. NVIDIA Jetson AGX Orin/Xavier supports two types of flashes using SDK Manager and Flash.sh script. Preparation required NVIDIA Jetson AGX Orin/Xavier Development Kit Computer with Ubuntu 18.04/20.04 USB TYPE-C data cable 1pc  

  2.95MP IMX623 GMSL2 Camera Overview  SG3S-IMX623C-G2F-Hxxx camera module is equipped with SONY CMOS image sensor IMX623 and Maxim GMSL2. It has an automotive-grade sensor , which comes with an IP67-rated enclosure – is supplied with AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Features  1. Output format: Uncompressed RAW format 2. IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots