CAMERA CUSTOMIZATION
Home Automotive Camera DMS & OMS Camera

5MP RGBIR OMS Camera

5MP RGBIR OMS Camera

The camera is equipped with OmniVision CMOS image sensor OX05B1S and Maxim GMSL serializer MAX9295A. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, It is also equipped with an M12 automotive grade lens that supports visible light and 940nm infrared light recognition.

  • Model

    OMSBDAAN
  • Resolution

    5MP
  • ISP

    OAX4000
  • Product Category

    OMS Camera
  • Frame Rate

    AA:2592H*1944V@30fps/AB:2592H*1800V@60fps
  • Connector

    Amphenol Fakra(Z Code )+Molex
  • Output data

    YUV422@8bit
  • Serializer

    MAXIM MAX9295A
  • Sensor Type

    OmniVision 5MP OX05B1S RGB-IR
  • Operating temp.range

    -40°C~+85°C
  • Dimensions

    28.8mm*44.2mm*20mm
  • FOV

    HFOV 130°

 

5MP RGBIR OMS Camera

 

   Overview

OMSBDAAN camera module is equipped with OmniVision CMOS image sensor OX05B1S and Maxim GMSL serializer MAX9295A. It has an automotive-grade sensor with a well tuned Image Signal Processor (ISP) that produces exceptional image quality, It is also equipped with an M12 automotive grade lens that supports visible light and 940nm infrared light recognition.

 

 

   Product Default 

1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope.

2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.

 

 

    Development/Capture Kits

 

Adapter board/Image Solution

Adaptation Developer kit

/output interface

Maximum number of cameras connected Picture
SG8A-ORIN-GMSL2‍ Adapter board

NVIDIA Jetson AGX Orin/AGX Xavier 

Developer kit

1


CoaxCapture II GMSL Capture Card

PC/IPC/PCIe3.0

8


If you need relevant development support, please contact Sales@sensing-world.com

 

 

 

   Features 

1. Global Shutter

2. 940nm band infrared ray

3. Output format: Uncompressed YUV422 format

4. Multi−Camera synchronization Support

5. Support different focal length lens

6. FCC , CE and RoHS

 

 

   Application

1. Automotive

2. ADAS + Viewing Fusion

3. Driver Monitoring System

4. Occupant Monitoring System

5. In-Cabin Monitoring System

 

 

   Coaxial Cable

 

Product Name Order PN# Specification
Mini-fakra Coaxial Cable 4-in-1(Rosenberg) R4JC-JC-ZZZZ-0500L Mini-fakra, 4 in 1, 0.5m, Female to Female
Mini-fakra Coaxial Cable 4-in-1(TE) T4JC-PC-ZZZZ-0500A Mini-fakra, 4 in 1, 0.5m, Male to Female
Mini-fakra Coaxial Cable 4-in-1(Rosenberg) R4JC-PC-ZZZZ-0500L Mini-fakra, 4 in 1, 0.5m, Male to Female
Mini-fakra Coaxial Cable 4-in-1(TE) T4JC-JC-ZZZZ-0500A Mini-fakra, 4 in 1, 0.5m, Female to Female
Camera coaxial Cable SG-JSZPSZ2000L 2M, Male to Female, IP67
Camera coaxial Cable SG-JSZJSZ2000L 2M, Female to Female, IP67
Camera coaxial Cable SG-JSZPSZ3000L 3M, Male to Female, IP67
Camera coaxial Cable SG-JSZJSZ3000L 3M, Female to Female, IP67
Camera coaxial Cable SG-JSZPSZ5000L 5M, Male to Female, IP67
Camera coaxial Cable SG-JSZJSZ5000L 5M, Female to Female, IP67
Camera coaxial Cable SG-JSZJSZ7000L 7M, Female to Female, IP67
Camera coaxial Cable SG-JSZJSZ8000L 8M, Female to Female, IP67
Camera coaxial Cable SG-JSZPSZL100L 10M, Male to Female, IP67
Camera coaxial Cable SG-JSZJSZL100L 10M, Female to Female, IP67
Camera coaxial Cable SG-JSZJSZL120L 12M, Female to Female, IP67
Camera coaxial Cable SG-JSZJSZL160L 16M, Female to Female, IP67
Camera coaxial Cable SG-JSZJSZL200L 20M, Female to Female, IP67

 

 

   Product specifications and instructions

Please contact the sales of SENSING or through sales@sensing-world.com Obtain.

 

   Installation guide document

Click to download

 

   Driver List

Detailed View

 

   Other technical documents

SerDes configuration file;

3D STP files;

The method of API interface reading internal parameters;

To learn more, please contact the sales of SENSING or through Support@sensing-world.com (Note camera QR code) Obtain.

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Related Products

2MP HD DMS Camera for Driver Status Monitoring
2MP DMS Camera

The camera is equipped with OmniVision CMOS image sensor OV02311 and Maxim GMSL serializer MAX96717F. lt has an automo.tive-grade sensor with a well-tuned lmage Signal Processor (lSP) thatproduces exceptional image quality, lt is also equipped with an infra.red automotive grade lens that supports 940nm infrared light recogni-tion.

Read More
Adapter Board for NVIDIA Jetson Orin NX/Nano
Jetson Orin NX/Nano 2CH GMSL2 camera adapter board

  Jetson Orin NX/Nano 2CH GMSL2 camera adapter board Overview  SG2A-G2-M4L-F adapter board, which allows up to 2 cameras to be connected to the NVIDIAJetson Orin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. Asthere are many difffferent types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications.  Adapter plate function Compatible with offfficial kits Support for NVIDIA Jetson Orin Nano/NX Development Kit Compatible with different versions of NVIDIA JetPack SDK Jetpack 5.1, L4T r35.2.1 and above Supports up to 2 GMSL cameras Support for synchronous triggering Support for external trigger signals for camera synchronisation Cameras can transmit up to 15 metres By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 15 metres. Instructions for using the adapter plate The SG2A-G2-M4L-F is an adapter board for use with the NVIDIA Jetson Xavier/Orin Nano/NX kit. Thedriver package was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Xavier/Orin Nano/NX supports two typesof flushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script. Preparation required SG2A-G2-M4L-F adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit Computer with Ubuntu 18.04/20.04s 1 USB TYPE-C data cable 1pc  

Read More
GMSL Capture Cards
CoaxCapture II GMSL Video Capture Card CCG3-8H

Mature and fast multi-sensor solutions for autonomous machine prototype   Based on various IPC, insert CoaxCapture GMSL Capture cards. The cards are connected to the camera of the whole vehicle. Each card can reach up to 8*8MP at most. At the same time, it can be connected to GPS or PTP for time service. The data with time stamp can be transmitted to the industrial personal computer GPU for processing with low delay and lossless through the PCIe Gen3 interface.      Low latency, multi-sensor synchronization accuracy<1ms, camera data can be reused for acquisition and perception    Millisecond precision latecy, provides exposure data and enables precise sensor fusion. The innovative camera data BYPASS technology enables camera reuse, enabling the two systems of perception algorithm and acquisition to work simultaneously, recording all data of driving for playback.   CoaxCapture II GMSL Capture Card CoaxCapture GMSL Video Capture Card CCG3-8H, it is a high- speed image product based on FPGA. The card can connect GMSL/GMSL2 cameras, and has the advantages of high framerate, high speed, low latency, etc. It is widely used in autonomous machine, autonomous vehicle, data capture and other scenes.   ◎ 8 GMSL cameras input, support up to 8 Mega Pixels@ 30 fps; ◎ PCI-e Gen3*8lane; ◎ Support external trigger synchronization; ◎ Support GPS Timing synchronization; ◎ Support network PTP timing synchronization;     Application 1▼ Perception hardware solution of Autonomous  Provide Camera+CoaxCapture Capture Card+IPC+Coaxial cable       Application 2▼ Vehicle data acquisition - Perception Provide Camera+CoaxCapture Capture Card+Bypass+IPC+Coaxial cable It can also be connected to the original camera, supporting RAW and YUV data of camera     Our Advantage▼   8CH Up to 8 channels  8MP@30fps 3.0 PCI-e Gen3.0  Up to 4800 MB/s continuous  bandwidth <1ms Support GPS synchronization,  PTP time synchronization, accuracy <1ms, and direct time stamp  function inside the board N+ Adapt to mainstream IPC brands Rapid technical support Support other brand camera access            

Read More
GMSL2 Camera Kit
6CH GMSL2 Camera Developer Kit for NVIDIA Jetson Orin NX

  6CH GMSL2 Camera Developer Kit for NVIDIA Jetson Orin Nano/NX Overview  SG6C-ORNX-G2-F is a computing platform carrier board designed for NVIDIA Jetson Xavier/Orin NX series modules, and is also compatible with TX2-NX and Nano SOM core modules. PCIe expandable 4G, M.2 Key-Baccess to 5G modules, 2-way CAN bus, 2-way USB3.0 compatible with 2.0, etc. With long MTBF stable operation capability, it is widely used in low-speed automatic driving controller,logistics, security, transportation and other industries, and the end product form is rich for application in robots, drones, unmanned delivery vehicles, unmanned ships, intelligent law enforcement equipment, etc. Adapter plate function Support for NVIDIA Jetson AGX Orin/Xavier Development Kit Support for NVIDIA Jetson Xavier/Orin NX (compatible with TX2-NX/Nano) Supports M.2 KEY M 2280 (PCIex4 NVMe SSD or Compute Stick) Supports 6 GMSL cameras (GMSL1 and GMSL2 compatible) Supports M.2 KeyB extension interface for access to 5G modules Supports mini-PCIe expansion interface for access to 4G modules Supports dual Gigabit RJ45 network interfaces Dual-band WIFI support and optional GPS support Supports a wide range of interfaces (e.g. USB/Serial/CAN/GPIO, etc.) Compatible with installation of different versions of NVIDIA JetPack SDK Carrier board operating instructions Instructions for using the adapter plate The SG6C-ORNX-G2-F carrier board is used with NVIDIA Jetson Xavier/Orin NX and other core boards. The driver package is developed on a specific Jetson Linux version and you need to make sure the Jetson Linux version matches before installing the driver. If it does not match,you need to re-flash the system, otherwise the system will not boot after installing the driver. NVIDIA Jetson Xavier/Orin NX supports two types of flushing methods, using SDK Manager and via the Flash.sh script. Preparation required SG6C-ORNX-G2-F carrier board with NVIDIA Jetson Xavier/Orin NX module and SSD Computer with Ubuntu 18.04/20.04 USB TYPE-C data cable 1pc  

Read More
SN2M4EFGD Starlight camera module
2MP RGGB with ISP Starlight Camera

  2MP RGGB with ISP Starlight Camera Overview  SN2M4EFGD Starlight Camera is equipped with a 2M dim light dedicated image sensor, a 2M high-performance lSP image processing chip, and a Maxim GMSL2 serializer. lt is designed and positioned as a dim light camera. After professional image debugging, it has high-quality image effects both in day and night, which comes with an IP67-rated enclosure-is supplied with an M16 lens that is focused and glued in our factory.   Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SG8A-ORIN-GMSL2‍ Adapter board  NVIDIA Jetson AGX Orin/AGX Xavier Developer kit   8 SerDes Camera to USB Converter SG8-U30-GMSL2 NVIDIA Jetson Orin Nano/NX Developer Kit ARM platform/computer/industrial computer/USB3.0 interface 1   CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP5X compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
NVIDIA Jetson Orin NX/Nano Development Kit
2CH GMSL2 Camera Developer Kit for NVIDIA Jetson Orin NX/Nano

  Jetson Orin NX/Nano 2CH GMSL2 camera adapter board Overview  SG2A-G2-M4L-F adapter board, which allows up to 2 cameras to be connected to the NVIDIAJetson Orin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. Asthere are many difffferent types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications.  Adapter plate function Compatible with offfficial kits Support for NVIDIA Jetson Orin Nano/NX Development Kit Compatible with different versions of NVIDIA JetPack SDK Jetpack 5.1, L4T r35.2.1 and above Supports up to 2 GMSL cameras Support for synchronous triggering Support for external trigger signals for camera synchronisation Cameras can transmit up to 15 metres By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 15 metres. Instructions for using the adapter plate The SG2A-G2-M4L-F is an adapter board for use with the NVIDIA Jetson Xavier/Orin Nano/NX kit. Thedriver package was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Xavier/Orin Nano/NX supports two typesof flushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script. Preparation required SG2A-G2-M4L-F adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit Computer with Ubuntu 18.04/20.04s 1 USB TYPE-C data cable 1pc  

Read More
OmniVision Camera Modules
1.3MP OX01F10 with ISP FPDLinkIII Camera

  1.3MP OX01F10 with ISP  FPDLinkIII Camera      Overview SG1-OX01F10C-FPDLink-Hxxx camera module is equipped with OmniVision CMOS image sensor OX01F10 and TI FPDLink III. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure   is supplied with an M12 lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Adapter board/Image Solution Adaptation Developer kit /output interface Maximum number ofcameras connected Picture ‍SG2A-ORIN-FPDLink‍ Adapter plate NVIDIA Jetson AGX Orin/AGX Xavier Developer kit 8 SGDA-01413‍ Adapter board Texas Intrusments FPDLink III   Developer Kit 4 SerDes Camera to USB Converter SG8-U30-‍FPDLink NVIDIA Jetson Orin Nano/NX Developer Kit   ARM platform/computer/industrial computer/USB3.0 interface 1 Compatible with UVC protocol, providing upper computer acquisition software If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. Calibrate camera internal parameters 3. S-mount IP67 compliant lens focused and glued at our factory 4. Multi−Camera synchronization Support 5. Support different focal length lens 6. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
Robotics&industrial Camera
2.95MP IMX623 GMSL2 Camera

  2.95MP IMX623 GMSL2 Camera Overview  SG3S-IMX623C-G2F-Hxxx camera module is equipped with SONY CMOS image sensor IMX623 and Maxim GMSL2. It has an automotive-grade sensor , which comes with an IP67-rated enclosure – is supplied with AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Features  1. Output format: Uncompressed RAW format 2. IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

contact