6x GMSL2 Camera Developer Kit

  6CH GMSL2 Camera Developer Kit for NVIDIA Jetson Orin Nano/NX Overview  SG6C-ORNX-G2-F is a computing platform carrier board designed for NVIDIA Jetson Xavier/Orin NX series modules, and is also compatible with TX2-NX and Nano SOM core modules. PCIe expandable 4G, M.2 Key-Baccess to 5G modules, 2-way CAN bus, 2-way USB3.0 compatible with 2.0, etc. With long MTBF stable operation capability, it is widely used in low-speed automatic driving controller,logistics, security, transportation and other industries, and the end product form is rich for application in robots, drones, unmanned delivery vehicles, unmanned ships, intelligent law enforcement equipment, etc. Adapter plate function Support for NVIDIA Jetson AGX Orin/Xavier Development Kit Support for NVIDIA Jetson Xavier/Orin NX (compatible with TX2-NX/Nano) Supports M.2 KEY M 2280 (PCIex4 NVMe SSD or Compute Stick) Supports 6 GMSL cameras (GMSL1 and GMSL2 compatible) Supports M.2 KeyB extension interface for access to 5G modules Supports mini-PCIe expansion interface for access to 4G modules Supports dual Gigabit RJ45 network interfaces Dual-band WIFI support and optional GPS support Supports a wide range of interfaces (e.g. USB/Serial/CAN/GPIO, etc.) Compatible with installation of different versions of NVIDIA JetPack SDK Carrier board operating instructions Instructions for using the adapter plate The SG6C-ORNX-G2-F carrier board is used with NVIDIA Jetson Xavier/Orin NX and other core boards. The driver package is developed on a specific Jetson Linux version and you need to make sure the Jetson Linux version matches before installing the driver. If it does not match,you need to re-flash the system, otherwise the system will not boot after installing the driver. NVIDIA Jetson Xavier/Orin NX supports two types of flushing methods, using SDK Manager and via the Flash.sh script. Preparation required SG6C-ORNX-G2-F carrier board with NVIDIA Jetson Xavier/Orin NX module and SSD Computer with Ubuntu 18.04/20.04 USB TYPE-C data cable 1pc  

  16CH GMSL2 Camera Developer Kit for NVIDIA Jetson AGX Orin Overview  SG4A-ORIN-GMSL2 adapter board, which allows up to 16 cameras to be connected to the Jetson AGX Orin/Xavier module, is fully compatible with the NVIDIA Jetson AGX Orin/Xavier Development Kit. As there are many different types of GMSL cameras available, the adapter board can be adaptively operated at different frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through software configuration.The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and power are sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install in automotive applications. Adapter plate function Compatible with official kits Support for NVIDIA Jetson AGX Orin/Xavier Development Kit Compatible with different versions of NVIDIA JetPack SDK Jetpack 5.0.1, L4T r34.1.1 and above Supports up to 16 GMSL cameras Each SG4A-ORIN-GMSL2 single board has a built-in Maxim MAX96712, which supports 4*GMSL2 cameras and can be connected to a total of 4 SG4A-ORIN GMSL2s, expanding to a maximum of 16 channels. Support for synchronous triggering Support for external trigger signals for camera synchronisation Cameras can transmit up to 15 metres By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 15 metres. Instructions for using the adapter plate SG4A-ORIN-GMSL2 adapter board is developed on a specific Jetson Linux version and you need to make sure the Jetson Linux version matches before installing the driver. If it does not match, you need to re-flash the system, otherwise the system will not boot after installing the driver. NVIDIA Jetson AGX Orin/Xavier supports two types of flashes using SDK Manager and Flash.sh script. Preparation required NVIDIA Jetson AGX Orin/Xavier Development Kit Computer with Ubuntu 18.04/20.04s 1 USB TYPE-C data cable 1pc