CAMERA CUSTOMIZATION
Home Robotics&industrial Camera

Event Based Camera

Event Based Camera

  • Brand

    SGWRD
  • Model

    SE1-S4-USB
  • Resolution (px)

    1280 x 720
  • Latency (μs)

    800 us @ 1000lux
  • Dynamic Range (dB)

    >110*
  • Nominal contrast threshold (%)

    25
  • Pixel size (μm)

    4.86 x 4.86
  • Camera Max. Bandwidth (Gbps)

    1.6
  • Camera power (W)

    Typ 0.5
  • Readout throughput

    20Mevents/s (default, setting changeable)
  • Interface (data output)

    USB 3.0
  • Trigger In

    4Pin Connector
  • Sync In/Out

    4Pin Connector
  • Dimensions

    35mm x 35mm x 35mm
  • Weight

    80g

 

 

 

 

 

Event Based Camera

 

Speed, performance, efficiency and safety bring new heights to autonomous machine, automation and high-speed sports

 

 SONY IMX646 EVS image sensor is adopted,

based on PROPHESEE METALVISION technology

 

High frame rate and Up to 120dB HDR

 

High speed and high time resolution. Now there is no frame rate concept. It makes full use of events different from frames to reveal the invisible things hidden in the super fast and transient dynamic scene.

 

Product Model

SE1-S4-USB-HxxxC

C Mount Lens

SE1-S4-USB-HxxxM

M12 Mount Lens

Back View

 

 

 

SE1-S4-USB EVS camera has two types of lenses, M12 and CS mount Lens, which can be selected by customers according to different application Its appearance size is 35x35x35mm, and it weighs 80g. The body is compact and convenient, and it is easier to install.

 

 

 

 

Advantage

  • Speed
    800us latency at 1k lux
    Achieve high-speed and high-temporal resolution.
  • HDR
    120dB Dynamic Range
    Achieve high robustness even in extreme lighting conditions. With Metavision sensors you can now perfectly see details from pitch dark to blinding brightness in one same scene, at any speed.
  • LOW LIGHT
    0.1 Lux Low-Light Cutoff
    Sometimes the darkest areas hold the clearest insights. Metavision enables you to see events where light almost does not exist, down to 0.1lux.

 

  • USB3.0
    USB3.0 output provides a fast and convenient interface, which can be connected to most systems for customers to use. At the same time, power is supplied through USB3.0, and drive free external power is supplied separately
  • Different interface of Lens
    M12/C mount Lens
    M12 and C-Mount lenses are available for 
    different scenes.
  • Compatible with the MetaVision
    It is compatible with the PROPHESEE MetaVision sdk of prophase. You can directly connect to the metavision software and call the metavision sdk function.

 

 

Specification

For more details, please click to send us email

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Related Products

GMSL Camera Module
1.3MP OX01F10 with ISP GMSL Camera

  1.3MP OX01F10 with ISP GMSL Camera Overview  SG1S-OX01F10C-G1G-Hxxx camera module is equipped with OMNIVSION CMOS image sensor OX01F10 and Maxim GMSL. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. Autonomous Driving 4. Robots  

Read More
GMSL Camera Module
1.3MP AR0144 with ISP GMSL Camera

  1.3MP AR0144 with ISP GMSL Camera      Overview SG1-AR0144C-8310-GMSL-Hxxx camera module is equipped with ONSEMI CMOS image sensor AR0144 and Maxim GMSL. It has an automotive-grade sensor , which comes with an IP67-rated enclosure is supplied with an M12 lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Image Solution Adaptation Developer kit/output interface Maximum number ofcameras connected Picture SerDes Camera to USB ConverterSG8-U30-GMSL2 NVIDIA Jetson Orin Nano/NXDeveloper KitARM platform/computer/industrialcomputer/USB3.0 interface 1 Compatible with UVC protocol, providing upper computer acquisition software CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
GMSL2 Camera
2.6MP AR0233 with ISP GMSL2 Camera

  2.6MP AR0233 with ISP GMSL2 Camera      Overview SG2-AR0233C-5200-G2A-Hxxx camera module is equipped with ONSEMI CMOS image sensor AR0233 and Maxim GMSL2. It has an automotive grade sensor with a welltuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure is supplied with an M12 lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number ofcameras connected Picture SG8A-ORIN-GMSL2‍ Adapter board NVIDIA Jetson AGX Orin/AGX Xavier Developer kit 8 SerDes Camera to USB ConverterSG8-U30-GMSL2 NVIDIA Jetson Orin Nano/NXDeveloper KitARM platform/computer/industrialcomputer/USB3.0 interface 1 Compatible with UVC protocol, providing upper computer acquisition software CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
Robotics&industrial Camera
2.95MP IMX623 GMSL2 Camera

  2.95MP IMX623 GMSL2 Camera Overview  SG3S-IMX623C-G2F-Hxxx camera module is equipped with SONY CMOS image sensor IMX623 and Maxim GMSL2. It has an automotive-grade sensor , which comes with an IP67-rated enclosure – is supplied with AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Features  1. Output format: Uncompressed RAW format 2. IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
5.4MP GMSL2 Camera
5.4MP IMX490 with ISP GMSL2 Camera

  5.4MP IMX490 with ISP GMSL2 Camera      Overview SG5-IMX490C-5300-GMSL2-Hxxx camera module is equipped with SONY Semiconductor CMOS image sensor IMX490 and Maxim GMSL2 . It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure – is supplied with an M12/M15/M16/AA lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number ofcameras connected Picture SG8A-ORIN-GMSL2‍ Adapter plate NVIDIA Jetson AGX Orin/AGX Xavier Developer kit 8 CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67/IP69K compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
SG3S-OX03JC-G2F-Hxxx camera module
3MP OX03J10 with ISP GMSL2 Camera

  3MP OX03J10 with ISP GMSL2 Camera Overview  SG3S-OX03JC-G2F-Hxxx camera module is equipped with OMNIVISION OX03J10 and Maxim GMSL2 serializer MAX96717F. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure is supplied with an M12 lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SG8A-ORIN-GMSL2‍ Adapter board  NVIDIA Jetson AGX Orin/AGX Xavier Developer kit   8 SerDes Camera to USB Converter SG8-U30-GMSL2 NVIDIA Jetson Orin Nano/NX Developer Kit ARM platform/computer/industrial computer/USB3.0 interface 1   CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. External trigger support 4. Multi−Camera synchronization Support 5. Support different focal length lens 6. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
OmniVision Camera Modules
1.3MP OX01F10 with ISP FPDLinkIII Camera

  1.3MP OX01F10 with ISP  FPDLinkIII Camera      Overview SG1-OX01F10C-FPDLink-Hxxx camera module is equipped with OmniVision CMOS image sensor OX01F10 and TI FPDLink III. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure   is supplied with an M12 lens that is focused and glued in our factory.        Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order.         Development/Capture Kits   Adapter board/Image Solution Adaptation Developer kit /output interface Maximum number ofcameras connected Picture ‍SG2A-ORIN-FPDLink‍ Adapter plate NVIDIA Jetson AGX Orin/AGX Xavier Developer kit 8 SGDA-01413‍ Adapter board Texas Intrusments FPDLink III   Developer Kit 4 SerDes Camera to USB Converter SG8-U30-‍FPDLink NVIDIA Jetson Orin Nano/NX Developer Kit   ARM platform/computer/industrial computer/USB3.0 interface 1 Compatible with UVC protocol, providing upper computer acquisition software If you need relevant development support, please contact Sales@sensing-world.com          Features  1. Output format: Uncompressed YUV422 format 2. Calibrate camera internal parameters 3. S-mount IP67 compliant lens focused and glued at our factory 4. Multi−Camera synchronization Support 5. Support different focal length lens 6. FCC , CE and RoHS        Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More
 2MP THINE Camera
2MP OX03C10 with ISP THINE Camera

  2MP OX03C10 with ISP THINE Camera Overview  SG2-OX03CC-5200-TH241A-Hxxx camera module is equipped with OMNIVISION CMOS image sensor OX03C10 and Thine TH241A. It has an automotive-grade sensor with a welltuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure   is supplied with an M12 lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Features  1. Output format: Uncompressed YUV422 format 2. Calibrate camera internal parameters 3. S-mount IP67 compliant lens focused and glued at our factory 4. Multi−Camera synchronization Support 5. Support different focal length lens 6. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  

Read More

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

contact