2CH GMSL3 Camera Developer Kit for NVIDIA Jetson Orin NX/Nano
Brand
SGWRDModel
2CH GMSL3 Camera Developer Kit for NVIDIA Jetson Orin NX/NanoProduct Category
Adapter BoardConnector
1x22Pin ZIF connectorsOperating temp.range
-20°C～+65°CDimensions
80mm*53mmAdaptation Kit
Jetson Orin NX/NanoCamera Connector
Fakra Z CodeCamera Input
Camera*2(GMSL2/GMSL1)Deserializer
MAXIM(ADI) MAX96792Weight
50g
Jetson Orin NX/Nano 2CH GMSL3 camera adapter board
SG2A-G3-M4L adapter board, which allows up to 2 cameras to be connected to the NVIDIA JetsonOrin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. As thereare many different types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL2 and GMSL3 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications.
- Overview
- Adapter plate function
- Compatible with offfficial kits
Support for NVIDIA Jetson Orin Nano/NX Development Kit
- Compatible with different versions of NVIDIA JetPack SDK
Jetpack 5.1, L4T r35.2.1 and above
- Supports up to 2 GMSL cameras
- Support for synchronous triggering
Support for external trigger signals for camera synchronisation
- Cameras can transmit up to 14 metres
By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 14 metres.
The SG2A-G3-M4L is an adapter board for use with the NVIDIA Jetson Orin Nano/NX kit. The driverpackage was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Orin Nano/NX supports two types offlushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script.
- Instructions for using the adapter plate
- Preparation required
- SG2A-G3-M4L adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit
- Computer with Ubuntu 18.04/20.04s 1
- USB TYPE-C data cable 1pc
- GMSL2 Repeater
| Product Name | Description | Picture |
|
SG2-BP0102-GMSL2 GMSL2 Repeater
|
GMSL2 Repeater can realize one GMSL2 input and one GMSL2 output，so as to extend the transmission distance. |
 |
- Coaxial Cable
| Product Name | Specification | Picture |
|
Double-Female Mini-fakra Coaxial Cable 4-in-1
|
|
 |
|
Male and Female Mini-fakra Coaxial Cable 4-in-1
|
|
 |
|
Double-Female Camera Coaxial Cable
|
|
 |
|
Male and Female Camera Coaxial Cable
|
|
 |
- Datasheet
- Other technical documents
1. SerDes configuration file;
2. 3D STP files;
3. The method of API interface reading internal parameters;
To get more documents, please click to send us email
The camera is equipped with On-semi Semiconductor CMOS image sensor AR0820 and Maxim GMSL3. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure – is supplied with an AA lens that is focused and glued in our factory.
Read More
- 2~16 Meters long - Double-Female interface - IP67 Water-proof
Read More
8MP IMX728 GMSL3 Camera Overview SG8-IMX728C-G3A-Hxxx camera module is equipped with SONY CMOS image sensor IMX728 and Maxim GMSL3（Max96793）. It has an automotive-grade sensor without ISP, which comes with an IP67-rated enclosure – is supplied with an AA lens that is focused and glued in our factory. Product Default 1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SG2A-G3-M4L-F Adapter board NVIDIA Jetson Orin Nano Developer Kit 2 If you need relevant development support, please contact Sales@sensing-world.com Features 1. Output format: RAW data format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots
Read More
SGWRD is a subsidiary of SENSING. As an NVIDIA Elite partner, we provides high-quality images for artificial intelligence.
IPv6 network supported
English
English
Deutsch
русский
español
日本語
